Napoleon LINEAR PATIOFLAME GPFL48 User Manual page 19

Reinstallation: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing. Replace the glass embers. When the appliance is put back in service, check the burner flame pattern
with the image below.
NORMAL
Cleaning The Outer Patio Flame Surface: Do not use abrasive cleaners or steel wool on any painted, or stainless
steel parts of your Napoleon Patio Flame. Doing so will scratch the finish. Exterior heater surfaces should be
cleaned with warm soapy water. To clean stainless surfaces, use a stainless steel or a non-abrasive cleaner.
Always wipe in the direction of the grain. Over time, stainless steel parts discolor when heated, usually to a
golden or brown hue. This discoloration is normal and does not affect the performance of the patio flame.
WARNING!
The patio flame area must be clear and free from combustible materials, gasoline and
other flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air. Keep the
ventilation opening of the cylinder enclosure free and clear of debris.
ABNORMAL
19
www.napoleongrills.com