Table of Contents
Advertisement
Available languages
Available languages
Operating The Patio Flame
WARNING!
Never use this patio flame for other than the intended use. Do not use this appliance to
prepare food.
WARNING!
You must have clear and easy access to the on/off valve AFTER the appliance is installed
and connected to the gas supply in order to safely turn off the burner.
Initial Lighting: When lit for the first time, the patio flame emits a slight odor. This is a normal temporary
condition caused by the "burn-in" of internal paints and lubricants used in the manufacturing process and does
not occur again. Simply run the main burner on high for approximately one-half hour.
WARNING!
•
Children and adults should be alerted to the hazards of high surface temperatures and should stay away
from the patio flame to avoid burns or clothing ignition.
•
Children should be carefully supervised when they are in the area of the patio flame.
•
Clothing or other flammable materials should not be hung from the patio flame, or placed on or near
the patio flame. The area above the enclosure may be extremely hot. Direct contact with these metal
surfaces should be avoided in order to prevent burns or clothing ignition.
•
Any guard or protective device removed for servicing the patio flame must be replaced prior to operating
the patio flame.
•
Installation and repair should be done by a qualified service person. The patio flame should be inspected
before each use and at least annually by a qualified service person. More frequent cleaning may be
required as necessary. It is imperative that the control compartment, burners and circulating air
passageways of the patio flame be kept clean.
WARNING!
•
Never use the patio flame while it is raining.
•
Always turn the patio flame off when raining.
•
Never splash any liquid on the glass embers when the patio flame is operating.
•
The glass embers will be extremely hot while operating, never try to touch them.
•
Always ensure the patio flame stands firmly on level ground.
•
Never use the patio flame if the burner is damaged. Inspect the burner before each use. Ensure that
no debris such as leaves; grass or other objects have entered or are on the patio flame. If the burner is
damaged it must be replaced prior to using the patio flame with a replacement burner specified by your
Napoleon dealer.
•
Inspect the hose assembly before each use. If there is evidence of excessive abrasion or wear, or if the
hose is damaged it must be replaced prior to using the patio flame with a replacement hose assembly
specified by your Napoleon dealer.
NOTE!
The patio flame has been designed with several safety features, which include a safety valve. If
the burner flame is extinguished the patio flame will automatically shut down.
WARNING!
Any modification to the patio flame may compromise the safety of this appliance. Special
concern is as follows.
•
Do not bypass thermocouple safety.
•
Do not operate patio flame if any part has been under water. Immediately call a qualified service technician to
inspect the unit and replace any part of the control system and any gas control, which has been underwater.
17
www.napoleongrills.com
Advertisement
Table of Contents
