Lighting Instructions - Napoleon LINEAR PATIOFLAME GPFL48 User Manual

Outdoor gas fireplace
Hide thumbs Also See for LINEAR PATIOFLAME GPFL48:
Table of Contents

Advertisement

Available languages

Available languages

16

Lighting Instructions

WARNING!
WARNING!
WARNING!
2. Turn the burner control to the high position, press and hold in. When the burner
3. Continue to depress the burner control knob for 30 seconds and then release. If the
5. If the burner will not light with the electronic igniter, hold a lit long match or lit long
6. To shut down the burner turn the burner control knob clockwise to the off position.
Then turn the gas off at the source (propane cylinder valve or natural gas supply valve).
WARNING!
www.napoleongrills.com
Never use the appliance when it is raining. A cover has been provided to protect the burner
and glass embers when not in use. Remove the cover before starting the appliance.
Keep face and body away from burner area when lighting.
Ensure burner controls are in the off position. Slowly turn on the gas supply valve.
1. Press and hold electronic igniter button ( ).
lights, release the electronic igniter button.
flame goes out, repeat the procedure.
4. Adjust the flame to the desired height with the burner control knob.
butane lighter to the ignition area of the burner and continue with step 2.
The propane cylinder is equipped with an excess flow device. Unless burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.
If lighting the unit with a match, clip the match into the supplied lighting rod.
Igniter
Open Cover

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linear patioflame gpfl48mhp

Table of Contents