Toshiba Qosmio G10 User Manual page 171

■
Windows sounds are still heard even when the mode has been
switched to Monitor-in.
■
Fn + F1/Fn + F5 are not available.
■
With the Monitor-in mode, the screens of other applications will be
invisible. This condition may cause you to operate an application
incorrectly by pressing a mouse button or any key on the keyboard.
To prevent operational errors, it is recommended to perform the
following:
■
■
■
The Monitor-in button will remain disabled for about 30 seconds
immediately after power-on or returning from the Standby or
Hibernation mode.
■
Do not turn off the power while the Monitor-in mode is active. Be sure
to turn off the power after switching to the Windows or QosmioPlayer
mode.
■
When you connect the Monitor-in cable to the Monitor-in port, audio
data from the input device will be played through the speakers on your
computer. This is because the Monitor-in port also works as the LINE in
port, resulting in a false recognition.
In that case, right-click the Volume icon in the message area located at
the top right corner of the desktop, and select the Open Volume
Control option from the menu that appears.
The Volume Control tab opens. Turn on the Mute checkbox in the
Line In section on the far right of the tab.
User's Manual
Using the Remote Controller, AV Buttons and QosmioPlayer
Close any applications running on your system.
Do not touch the mouse or keyboard.
8-29