Boot Priority - Toshiba Qosmio G10 User Manual

HW Setup
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted.
Auto-Selected
LCD + Analog RGB

Boot Priority

There are two types of models: one with one hard disk drive and the other
with two hard disk drives. Setting options may vary depending on the
model.
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
"HDD" here refers to the Built-in HDD that is defined in the HDD Priority
Option so that it should be recognized first.
HDD −> FDD −> CD-
ROM −> LAN
FDD −> HDD −> CD-
ROM −> LAN
HDD −> CD-ROM −>
LAN −> FDD
FDD −> CD-ROM −>
LAN −> HDD
CD-ROM −> LAN −>
HDD −> FDD
CD-ROM −> LAN −>
FDD −> HDD
7-2
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
Selects both the internal LCD and external
monitor for simultaneous display.
The computer looks for bootable files in the
following order: HDD, floppy disk drive, CD-ROM
and LAN. (Default)
The computer looks for bootable files in the
following order: floppy disk drive, HDD, CD-ROM
and LAN.
The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN and floppy
disk drive.
The computer looks for bootable files in the
following order: floppy disk drive, CD-ROM, LAN
and HDD.
The computer looks for bootable files in the
following order: CD-ROM, LAN, HDD, floppy disk
drive.
The computer looks for bootable files in the
following order: CD-ROM, LAN, floppy disk drive
and HDD.
User's Manual