Toshiba Qosmio G10 User Manual page 114

The Keyboard
Instant security: Press Fn + F1 to blank the screen to prevent others from
accessing your data. To restore the screen and original settings, press any
key or press the Touch Pad. If a screensaver password is registered, a
dialog box will appear. Enter the screensaver password and click OK. If no
password is set, the screen will be restored when you press any key or
press the Touch Pad.
During the Monitor-in mode, Fn + F1 is not available.
Power save mode: Pressing Fn + F2 changes the power save mode.
If you press Fn + F2 in a Windows environment, the Power Save Mode is
displayed in a dialog box similar to the one below. Continue holding down
Fn and press F2 again to change the setting. You can also change this
setting through the profile item in TOSHIBA Power Saver.
Standby: When you press Fn + F3, the computer enters Standby. To avoid
entering Standby unexpectedly, a dialog box appears for verification.
However, if you select the check box, it will not appear in the future.
Hibernation: When you press Fn + F4, the computer enters Hibernation.
To avoid entering Hibernation unexpectedly, a dialog box appears for
verification. However, if you select the check box, it will not appear in the
future.
5-4 User's Manual