Table of Contents
Advertisement
Connecting an Audio System
You can use your audio system as front speakers instead of
the front speakers on the TV.
Caution:
Do the following before connecting,
• Turn the power of all the equipment off.
• Set the amplifier volume to low.
• Read the manuals provided with the amplifiers and
speakers.
1 Stereo amplifier
2 Front speakers (Magnetic-shielded Type, L, R)
(Terminals on rear)
Notes:
• Use the AUDIO OUT terminals for connecting an audio
system.
The volume output is controlled via the TV and The AU-
DIO OUT terminal output is not interrupted by head-
phone connection.
• Use magnetic-shielded speakers for front speakers 2
to prevent interference by the TV.
1
Connect your stereo amplifier
OUT terminals.
2
Turn the TV on and set the volume to the low-
est setting.
3
Press
.
OK
The MENU appears.
4
Press
to choose SOUND SETTING. Then
/
press
.
OK
The Sound Setting menu appears.
5
6
7
1
to the AUDIO
Press
to choose SPEAKER and press
/
/
to choose OFF.
To output sound from the TV speakers:
Set SPEAKER to ON.
Press
.
OK
This completes the settings.
Turn the stereo amplifier on and re-adjust the
volume setting, then press
volume.
Note:
• Setting the volume of the stereo amplifier too high
may damage the speakers.
/
to adjust the
29
Advertisement
Table of Contents
