Table of Contents
Advertisement
Install
Using the ACI function
This TV has an ACI function which decodes the ACI (auto-
matic Channel Installation) data.
Using the ACI function allows all TV channels transmitted
from the cable TV station to be properly registered quickly ac-
cording to the data from the cable TV station.
Caution:
If your cable TV station broadcasts ACI data and if "ACI
START/ACI SKIP" appears in the Auto Program menu, the
ACI function is enabled. In all other cases, it is disabled.
1
Press
to choose ACI START. Then press
/
to start the ACI function.
OK
When you don't want to use the ACI function:
/
Press
to choose ACI SKIP and then press
If the Auto Program menu changes to another menu:
Depending on your cable TV station, there may be a
broadcast selection menu set up by the cable TV sta-
tion.
Follow the menu indications and use the
/
buttons to operate the menu. After you have
made the setting, press
If "ACI ERROR" is displayed in the Auto Program
menu:
"ACI ERROR" denotes that the ACI function is not work-
ing properly. Press
If "ACI ERROR" still appears even after you have tried
to start the ACI function several times, press
the Auto Program function. It does not cause any prob-
lem because all the TV channels are registered to the
PR channels by the Auto Program function.
2
When the settings are completed, the Edit
menu is displayed. Return to the instructions
that you were reading before, and continue the
operation.
When the "Initial setting" has been made:
Return to step 7 of "Initial setting" on page 4.
When the "Auto Program" has been made:
Return to step 4 of "Auto Program" on page 23.
Notes:
• If you have any questions about the items in the
Broadcast Selection menu or how to operate the
menu, please contact your cable TV station.
• When the cable TV broadcast reception is poor,
the ACI function will not work properly.
• If there is an error in the ACI data itself, the TV
channel can not be registered properly. If this hap-
pens, turn the ACI function off (ACI SKIP) and use
the Auto Program function. Alternatively, use the
Edit/Manual function to correct the PR channel
setting.
26
/
.
OK
to start the ACI function again.
OK
to start
Downloading the PR channel data to
the VCR.
You can transmit the latest PR channel data from the TV to
the VCR with T-V LINK.
1
Make sure that the T-V LINK menu is dis-
played.
Notes:
• You cannot display the T-V LINK menu directly by
.
OK
choosing it from a menu.
• You cannot transmit the PR channel data to the
VCR when a T-V LINK compatible VCR is not con-
nected. Press
• For details about T-V LINK, refer to page 5.
and
2
Turn the VCR on.
3
Press
.
OK
The data transmission begins.
The display disappears once the data transmission
ends.
Note:
• Depending on the type of VCR, the display may
change once data transmission ends.
In this case, refer to the VCR's manual.
Changing the Country Setting
1
Display the Install menu.
• To return to the Install menu from the Edit menu,
press
2
Press
/
press
.
OK
The Country menu appears.
3
Press
/
completes the setting.
4
Press
OK
• To return to the Install menu, press
tion).
to exit the menu.
TV
(information).
to choose AUTO PROGRAM. Then
/
/
to choose a Country. This
to exit the MENU.
(informa-
Advertisement
Table of Contents
