JVC AV-28WFX1EU, AV-32WFX1EU Instructions Manual page 25

3
Press the blue button.
The ID List menu appears.
4
Press to choose the station ID.
/
• To cancel the operation, press
5
Press .
OK
Adding a Station ID name of your own:
Do the following procedure in place of "Adding a Station ID".
1
Press / to choose the station, then press
the red button.
2
Press to choose a character, then press
/
/ to move the cursor.
3
Repeat step 2 to complete the Station ID, then
press .
OK
Inserting a new station
If you want to insert French stations to the PR channels:
You have to set the Country setting to FRANCE before insert-
ing French stations to the PR channels.
If your Country setting is not FRANCE, change the Country
setting to FRANCE. To change the Country Setting, refer to
"Changing the Country Setting" on page 26.
1
Press to choose the PR channel, then
/
press the green button.
2
Press / to choose CC or CH
To set a French station:
Choose CH1, CH2, CC1 or CC2.
• To cancel the operation, press
Note:
• For details on the relationship between the dis-
played CH/CC number and the actual channel
number, see the Channel Table on page 30.
3
Press the number buttons to enter the channel
number.
The channel number blinks. When the channel setting
is complete, the blinking goes off.
• To enter a one-digit channel number, enter the
Note:
• When you insert a station, the station preset to
Setting a station to a PR channel
manually
(Information).
If you want to set French stations to the PR channels:
You have to set the Country setting to FRANCE before setting
French stations to the PR channels.
If your Country setting is not FRANCE, change the Country
setting to FRANCE. To change the Country Setting, refer to
"Changing the Country Setting" on page 26.
1
Press
then press the blue button.
Note:
• PR channel number "AV" appears on the screen
2
Press the green or red button to search for a
station.
Scanning stops when the TV finds a station.
To continue searching, press the red or green button
again and repeat until the station you want appears.
If reception is poor:
Press the blue or yellow button to fine-tune the station.
If reception is not correct:
Press
When your COUNTRY setting is FRANCE:
If the broadcast system is not set correctly, you may be
unable to find the station you want to view. At such a
(Information).
time, press
then return to Step 2 and repeat it.
3
Press
.
number and press
OK
PR99 is deleted.
/ to choose a PR channel number,
as PR 0 channel. We recommend setting this PR
channel to the VCR RF channel from a VCR con-
nected to the aerial socket.
to choose the correct broadcast system.
to select the correct broadcast system,
.
OK
Install
25