JVC AV-28WFX1EU, AV-32WFX1EU Instructions Manual page 17

Colour System
The colour system is automatically chosen, but if the picture
is not clear or no colour appears, choose the colour system
manually.
1
Press / to choose COLOUR SYSTEM. Then
Press
.
OK
.
2
Press / to choose the appropriate colour
system.
PAL:
PAL system.
SECAM:
SECAM system.
NTSC3.58:
NTSC 3.58 MHz system.
NTSC4.43:
NTSC 4.43 MHz system.
AUTO:
Automatic colour system selection.
Notes:
• The AUTO may not function properly with poor sig-
nal quality. If the picture is abnormal in AUTO
mode, choose another colour system manually.
• When in the TV mode (PR 1 to PR 99), you cannot
choose AUTO, NTSC 3.58 or NTSC 4.43.
• When in the TV mode (PR 0), you cannot choose
NTSC 3.58 or NTSC 4.43.
3
Press .
OK
This completes the setting.
4:3 Auto Aspect
You can preset one of three ZOOM modes, REGULAR, PAN-
ORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal
picture (4:3 aspect ratio).
1
Press / to choose 4:3 AUTO ASPECT. Then
press
.
OK
The 4:3 AUTO ASPECT menu appears.
2
Press / to choose a ZOOM mode.
3
Press
.
OK
This completes the setting.
Picture Tilt
There are cases where the effects of the magnetic pull from
the earth may make the picture tilt . If this happens, correct
the picture as follows.
1
Press to choose PICTURE TILT. Then
/
press
.
OK
The PICTURE TILT menu appears.
2
Press until the picture becomes horizon-
/
tal.
3
Press .
OK
The correction is complete.
Picture Features
17