Toggle Vibrate Indicator - Honeywell MX9 User Manual

Toggle Vibrate Indicator

Start > Settings > Control Panel > Data Collection> Notification tab
The MX9 vibration motor is activated when a scan is completed successfully (good scan vibration) or with a failure (scan key
released before good scan, timeout, or rejected because of Data Options configuration).
The vibrations can be detected under the handstrap or through the trigger handle.
Toggle the vibrate indicator on or off by tapping the desired radio button for Good Scan Vibration and Bad Scan Vibration.
Options are:
Off
l
Short
l
Medium
l
Long
l
2-6