Charge Or Recharge The Main Battery - Honeywell MX9 User Manual

Charge or Recharge the Main Battery

Warning. Only use Honeywell batteries as replacements: MX9380BATTERY 161888-0001 or 161915-0001 (Low Temperature)
Note: The MX9 Battery Charger is designed for an indoor, protected environment. It is not authorized for use in areas
designated as Hazardous Locations.
New batteries must be fully charged prior to use.
The main battery can be recharged in an AC powered Battery Charger after the battery has been removed from the MX9 or its
packing material when new.
The main battery while in the MX9 can be recharged using several different methods.
Note: An external power source is required before the main battery in the MX9 will recharge.
The main battery can be recharged while it is in the MX9:
by connecting the MX9 AC power adapter to the I/O connector at the base of the MX9.
l
by docking the MX9 in a powered desk cradle
l
by docking the MX9 in a powered vehicle cradle
l
or by connecting the car power adapter (CLA) to the I/O connector at the base of the MX9.
l
Note: An uninterrupted external power source (wall AC adapters) transfers power to the computer's internal charging
circuitry which, in turn, recharges the main battery and internal battery. Frequent connection to an external power
source, if feasible, is recommended to maintain internal battery charge status as the internal battery cannot be
recharged by a dead or missing main battery.
2-4