Table of Contents
Advertisement
9
Starting scanning
About scanning conditions and the scanning area
For information about the setting items for Dr. PICZA, refer to the figures below.
The grid on the table serves as a guide for mounting the object to scan.
It does not indicate the scanning area for Dr. PICZA.
The scale is in 10-mm (3/8 in.) units.
Y SCAN PITCH
(Spacing of adjacent scan points
Maximum
along the Y axis)
scanning area
Scanning area
X SCAN PITCH
(Spacing of adjacent scan
points along the X axis)
Setting scanning conditions and starting scanning
Do not place hands near the main
unit while in operation.
Doing so may result in injury.
Doing so may lead to faulty operation or
breakdown.
24
: Scan path
(Draft scanning)
Table
: Scan points
surface
Scanning Area
Maximum
scanning area
Scan object
The explanations here and after are based on samples like
those shown in the figures.
Z Upper
Limit
Z BOTTOM
(Height of the scanning area's
bottom plane)
Advertisement
Table of Contents
