Table of Contents
Advertisement
[When using a single spacer]
Maximum scanning area
Scannable
portion
Scan object
Clay or
adhesive sheet
Table surface
* If the scan object protrudes beyond the spacer, use two spacers side by side.
[When using two spacers]
Maximum scanning area
Scannable
portion
Scan object
Clay or
adhesive sheet
Table surface
3)
Use clay or on adhesive sheet to secure the scan object in place.
- When securing the scan object in place on the table, do not use commercially available cellophane tape or double-
sided tape. When the tape is peeled off, the coating on the table surface may peel as well.
- When not using the adhesive sheet, store it with the backing paper affixed to the adhesive surface.
- Do not wash the adhesive sheet with water. Doing so may damage the adhesive surface, making it impossible to hold
a scan object in place.
A scan object which does not topple over when placed with the scan surface facing up is suited to being held in place by the
adhesive sheet. For other shapes, use clay to secure in place.
60.5 mm
(2-3/8 in.)
Spacer
60.5 mm
(2-3/8 in.)
Spacer
Spacer
30 mm (1-3/16 in.)
40 mm
(1-9/16 in.)
30 mm
(1-3/16 in.)
10 mm
(3/8 in.)
21
Advertisement
Table of Contents
