Installing - Roland Picza PIX-30 User Manual

Installing

Setting Up the Windows Version of the Program
Operating environment
Computer
CPU
System Memory
Hard Disk
* When setting up the software under Windows NT 4.0, log on as the member of a group other than [Guest].
Setup
1
Switch on the computer and start Windows.
2
Place the CD from the Roland Software Package in the CD-ROM drive.
The Setup menu appears automatically.
3
When the screen shown at right appears, click the
here], then choose [PIX-30].
Click [Install].
To view the description of a program, click the
view the manual, click the
PDF format for the programs that the
Acrobat Reader is required to view PDF files.)
4
The Setup program starts. Follow the messages to carry out
setup and finish setting up the program.
Personal computer running Windows 95, Windows 98, or Windows NT 4.0
If you're using Windows 95: i486SX or better (Pentium 100 MHz recommended)
If you're using Windows 98 or Windows NT 4.0: i486DX or better (Pentium 100 MHz recom-
mended)
If you're using Windows 95: 8 MB or more (10 MB or more recommended)
If you're using Windows 98 or Windows NT 4.0: 16 MB or more (32 MB or more recommended)
3 MB or more of free space
button. To
button. (There are manuals in
button references.
Dr.PICZA for Windows
in [Click
15