Samsung AR**FS**WK** Series User & Installation Manual page 31

PROBLEM
Fan speed
adjustment is not
working.
Remote controller is
not working.
Timer function does
not set.
The indicator
is blinking
continuously.
Odors permeate in
the room during
operation.
Error is indicated.
Noise is generated.
Smoke is generated
from the outdoor
unit.
Water is dropping
from the outdoor unit
piping connection.
Indoor unit display
indicates "
,
"
Australia_A3050_IB&IM_EN_03979A-03.indd 31
SOLUTION
• C heck if you have selected Auto/Dry/Fast/
these mode, fan speed is set to Auto and you cannot adjust the
fan speed.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller sensor.
• C heck that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interrupt the electric waves.
• C heck if you press the Set/Cancel button on the remote
controller after you have set the time.
• P ress the Power
off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
• C heck if the appliance is running in a smoky area. Ventilate the
room or operate the air conditioner in Fan mode for 1~2 hours.
(We do not use smelly components in the air conditioner.)
• Check the Drains have been cleared Regular Maintenance.
• W hen an indoor unit indicator blinks, contact the nearest service
center. Please ensure the error code is passed onto the service
center when booking the service call.
• D epending on the status of the air conditioner usage, noise can
be heard when refrigerant flow movement changes. It is normal.
• I f may not be a fire but it can be a steam generated by the defrost
operation from outdoor heat exchanger during Heat mode in
winter.
• W ater may be generated because of the temperature difference.
It is normal.
• T his is not a defect. If the air conditioner receives a Demand
, Response signal from the power supply utility, then the
compressor and fans will be operated according to DRM
mode(DRM 1, 2,3). The indoor unit display will indicate
" , , ".
 see page 16 for more details about DRM mode.
English-31
button or disconnect the power plug/switch
mode. In
2013-10-26 16:55:10