Samsung AR**FS**WK** Series User & Installation Manual page 11

Smart install
Through Smart install function, installer can check if the installation was done properly.

If the installation was not done properly, error indicator will turn on the indoor unit display.

Therefore user will know if the installation was done properly or not.
Checking the power consumption
This function will display the amount of electricity consumed by operating the air
conditioner.
(You have to use the remote controller to check the power consumption but it will not
be displayed on the remote controller display.)
Press the 2 F button and then press the Usage button on the remote controller while
nd
the air conditioner is operating.
When the air conditioner is not in use, power consumption will not be displayed on the
indoor unit display even if you press the 2
Indoor unit will display the amount of Power consumption for few seconds and then

return to usual status by displaying the indoor temperature.
Power consumption will be calculated from the moment the air conditioner is turned on

and calculated value will be reset when the air conditioner turns off.
0.1 is the default value of the electricity consumption and 99 is the maximum value.

Unit is in kWh.
Australia_A3050_IB&IM_EN_03979A-03.indd 11
F  Usage button.
nd
English-11
ARWK Series
ARUR Series
2013-10-26 16:55:02