AKENG44_Escalade Page 243 Wednesday, July 16, 2008 12:22 PM
To use the block heater:
1. Turn off the engine.
2. Unwrap the electrical cord
and plug it in. It uses a
normal, house voltage.
CAUTION
Plug the cord into a properly
grounded outlet. You can use a
heavy-duty extension cord
(rated for at least 15 amps)
connected to a properly
grounded outlet.
Ask a dealer in the area how long
you should keep the heater
plugged in.
Be sure to unplug and restow the
cord before starting the engine.
Otherwise, it may be damaged by
moving engine parts.
Section 3
■ TRANSMISSION
Automatic Transmission
NOTICE
Spinning the tires too fast or
holding the vehicle in one
place on a hill using only the
accelerator pedal may damage
the transmission.
Any resulting damage would
not be covered by your
warranty.
If the vehicle gets stuck do not
spin the wheels too fast.
When stopped during an uphill
climb, hold the vehicle in place
using the brakes.
243 . . .
–
–
–