Cadillac Escalade Owner's Manual page 133

AKENG44_Escalade Page 133 Wednesday, July 16, 2008 12:22 PM
The indicator light in the button
will glow when the lock-out
feature is activated.
You can control the passenger
windows with the switches on the
driver's door while this feature is
activated.
PROGRAMMING THE POWER
WINDOWS
If electrical power to the windows
is interrupted, you'll need to
reprogram the express close
feature for each front window.
To reprogram a window once
electrical power is restored:
1. Make sure the ignition is on or
in the accessory position, or
that Retained Accessory Power
is active.
2. Close all doors.
3. Press and hold the window
switch to fully open the
window.
Section 1
4. Pull up the window switch to
fully close the window and
keep holding the switch for
about two more seconds.
Release the switch.
5. Repeat the steps for the other
front window.
133 . . .
–