Parts And Functions - Haier ESA415J Service Manual

6. Parts and Functions

Mode
1. Press MODE until you see the indicator light glow for the desired setting.
2. Choose Fan, Cool, Energy Saver or Dehum.
■ Fan—Only the fan runs. Press SPEED to select High, Med or Low fan speed. The display shows the current
room temperature.
■ Cool—Cools the room. Press SPEED to select High, Med or Low fan speed. Press the TEMP/TIME up or down
arrow button to adjust the temperature.
■ Energy Saver—Fan runs only when cooling is needed. Press SPEED to select High, Med or Low fan speed.
Because the fan does not circulate the room air continuously,less energy is used, but the room air is not
circulated as often.
■ Dehum—Dries the room. The air conditioner automatically selects the temperature. Fan runs on Low speed only.
NOTE: Dehum mode should not be used to cool the room.
NOTE: After 5 seconds, display will show the current room temperature.
Fan Speed
NOTE: In Dehum mode, the Speed button will not operate.
1. Press FAN SPEED until you see the indicator light glow for the desired setting.
2. Choose High, Med or Low.
■ High—for maximum cooling
■ Med—for normal cooling
■ Low—for minimum cooling
NOTE: After 5 seconds, the display will show the current room temperature.
Temperature
(1) Press the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME
up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C).
NOTE: After 5 seconds, the display will show the current room temperature.
ESA415J
MODE
FAN
COOL
ENERGY
SAVER
DEHUM
SPEED
HIGH
MED
LOW
TEMP / TIME
13
Parts and Functions
Domestic Air Conditioner