Window Installation - Haier ESA415J Service Manual

Window Installation

Window opening measurements:
■ 28 " minimum to 38" (72.1 cm to 96.5 cm) maximum opening
3⁄8
width.
■ 17 " (44.1 cm) minimum opening height.
3⁄8
A. 28³⁄8" (72.1 cm) minimum
B. 17³⁄8" (44.1 cm) minimum
Prepare Air Conditioner for Installation
Prepare unit for installation
Unpack unit on the floor next to installationlocation.
1. Remove two front attachment screws.Separate the outer case from the front with a putty knife at the catch points
designated by the arrows.
Remove the two screws on top of the outer case.
2.
3. Using the basepan handle, slowly and evenly pull chassis out from outer case.
NOTE: Cover putty knife blade with masking tape to guard against damage of the unit finish.
CAUTION:
Never expose plastic front or grille to extreme temperatures.
Assemble Curtain/Top channel
NOTE: Attach curtains to the air conditioner before placing the air conditioner in window.
1. Install top channel with four 13/32" screws.
2. Slide left-hand curtain assembly into left end of top and bottom channels. Repeat for right-hand curtain assembly.
3. Fasten curtain retainer strips to the sides of the outer case with eight 13/32" screws.
ESA415J
A
B
8
Installation and Accessory Parts
Domestic Air Conditioner