Using The Visca Rs-422 Connector Pin Assignments - Sony EVI-H100V Operating Instructions Manual

Using the VISCA RS-422
connector pin assignments
The VISCA RS-422 connector pin
assignments
1 2 3 4 5
VISCA RS-422
Pin No. Function
1 TXD IN+
2 TXD IN–
3 RXD IN+
4 RXD IN–
5 GND
6 TXD OUT+
7 TXD OUT–
8 RXD OUT+
9 RXD OUT–
Using the VISCA RS-422 connector
plug
1
Insert a wire (AW G Nos. 28 to 18)
into the desired wire opening on the
supplied VISCA RS-422 connector
plug, and tighten the screw for that
wire using a flat-head screwdriver.
56
Specifications
6 7 8 9
Wire
Flat-head screwdriver
2
Insert the VISCA RS-422 connector
plug into the VISCA RS-422
connector on the rear of the camera.
Notes
• In order to stabilize the voltage level
of the signal, connect both ends to
GND.
• Do not make a VISCA RS-232C
connection when there is already an
existing VISCA RS-422 connection.
1 2
3 4
5 6
7 8
9