Changing The Handsfree/Earpiece Volume; Setting A Handsfree Profile - Gigaset SL400A User Manual

Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
In idle state:
t
Open the menu for setting the
call volume.
r
Set the earpiece volume.
s
Scroll to the Speaker line.
r
Set the handsfree volume.
§Save§
Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
t
Press the control key to call up
the Handset Volume menu. Set
the earpiece or handsfree vol-
ume by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§Save§
the display key .
If t is assigned to another function, e.g., call
¢
swap ( page 37):
§Options§
Open menu.
Volume Select and press
Configure setting (see above).
Please note
u
The settings for the earpiece also
apply to a connected headset.
u
You can also set the call volume using
¢
the menu ( page 28).
§OK§
.
Defining handset settings

Setting a handsfree profile

You can set different handsfree profiles to
optimally adapt your phone to your environ-
ment.
Profile 1
The optimum setting for most connec-
tions and set as default.
Profile 2
Optimum volume in handsfree mode.
However, this means that the participants
cannot speak at the same time as the per-
son speaking is given preferential trans-
mission (making two-way conversations
difficult).
Profile 3
Optimises two-way conversations, both
callers can hear each other, even if they
talk at the same time.
Profile 4
Optimised for special connections. If the
default setting (profile 1) does not pro-
vide optimum sound, please give this a
try.
In idle status:
¢ Ï ¢
v
Audio Settings
¢
Handsfree Profiles
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
During a conversation:
§Options§
Open menu.
Handsfree Profiles
Select and press
q
Select handsfree profile (1 to 4).
§Select§
Press the display key to save the
setting.
§OK§
.
73