Setting Keypad Illumination; Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume - Gigaset S910 User Manual

Handset settings
¤ You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
§Save§
Press the display key.

Setting keypad illumination

The brightness of the keypad illumination
can be set to one of five levels.
Ï
v ¢
¢ Display + Keypad
¢ Keypad Illumination
The current setting is displayed.
¤ Modify the entry:
Brightness:
Select 1 (darkest) to 5 (brightest).
§Save§
Press the display key.
•
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the base/charger without having to
press the talk key c.
Ï
v ¢
¢ Telephony ¢ Auto Answer
§Change§
Press display key (³= on).
58
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
During a conversation via the earpiece or in
handsfree mode:
ø/ ÷
Press the side key to call up the
Handset Volume menu.
Change the volume by pressing
ø (louder) or ÷ (quieter).
or
t
Press the control key to call up
the Handset Volume menu. Set
the earpiece or speaker volume
by pressing r.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§Save§
the display key .
If t is assigned to another function:
§Options§
Open menu.
Volume Select and press
Configure setting (see above).
Please note
u The settings for the earpiece also
apply to a connected headset.
u You can also set the call volume using
the menu (¢ page 27).
§OK§
.