Changing Phone Settings - Gigaset S820 User Manual

Changing phone settings

Changing phone settings
The handset and base are preconfigured, but you can change the settings to suit your individual
requirements.
You can change settings either during a call or in idle status via the Settings menu page.
Changing the display language
Menu key v ¤
Settings menu page
¤
select the language ( ´ = selected)
Setting the country and your own area code
Menu key v ¤
Settings menu page
¤ ¢
Next page 12.
Setting the display on the handset
Setting the screensaver/Slideshow
You can define a screensaver for the display's idle status.
Choose between an analogue clock/digital clock/picture/
slideshow. You can load pictures onto your handset using
the Gigaset QuickSync software (
To show the idle display again, briefly press a or the
display.
¤
Menu key v
Settings menu page 
¤ ¤
g Display Screensaver
- Use the switch to activate/deactivate the screen-
saver.
- Select the screensaver:
¤ ¤
Selection
through the selection
back without saving.
Setting the display backlight
The display backlight lights up as soon as you press a key, touch the display or remove the hand-
set from the base/charger.
You can specify the period of time in idle status after which the display backlight is switched off.
If no period is set, the display is permanently dimmed.
¤
Menu key v
Settings menu page
- Activate/deactivate the display backlight in or out of the charger.
- Select Timeout.
Please note
The handset's standby time can be significantly reduced if the display backlight is activated.
26
¤
° Language and Location
¤
è
¤
° Language and Location
¢
page 55).
Use ê or ë in the header to browse
¤
Select or touch
¤
g Display
Activation
Selection
Analogue Clock
'
to go
¤
Backlight
¤
Display Language
Screensaver
on
L