Q-See QT Series User Manual page 35

BASIC MENU
There are three tabs covering System, Date & Time and Daylight Savings Time (DST).
System Tab
The following settings can be changed in this menu:
Device Name: This will display when you
access the NVR remotely via your
mobile device, a web browser or
through the CMS software. Naming
the device will help users recognize
the device when monitoring
numerous NVRs remotely.
Device ID: If you have multiple systems, you
can give this device a numerical ID.
Video Format: Select between NTSC (North
America) or PAL (Europe) video
standards.
Password Check: By enabling this, a
user will need to enter name
and password when performing
configuration operations.
Show Time: Displays the time on-screen in Live View.
Max Network Users: Set the maximum number of network connections - up to 10.
VGA Output: Chose the configuration that best fits your monitor. Options are: VGA 800x600,
1024x768, 1280x1024 and HDMI.
Language: Select your preferred menu language. The NVR will have to restart for this change
to take effect.
Logout After... : You can have the NVR automatically log a user out after a period of inactivity.
The period can range from 30 seconds (.5), 1, 3 or 5 minutes or never.
Startup Wizard: When checked, the Startup Wizard will launch whenever the NVR reboots.
No Image When Logout: The monitor will not display the Live View when this box is checked.
IMPORTANT!
need to be restarted.
BASIC BASIC
After changing the Language or Video Format, the device will
System System Date & Time Date & Time DST DST
Device Name Device Name
Device ID Device ID
Video Format Video Format
Password Check Password Check
Show System Time Show System Time
Max Online Users Max Online Users
Video Output Video Output
Language Language
Logout After [Minutes] Logout After [Minutes]
Startup Wizard Startup Wizard
No Image When Logout No Image When Logout
PICTURE 4-4
EDVR EDVR
0 0
NTSC NTSC
10 10
HDMI HDMI
English English
5 5
Default Default Apply Apply Exit Exit
35