NEC DT730G (CG): ITL-12CG-3 User Manual page 17

1.
Attach the Faceplate securely. If not, the terminal will
not operate correctly because a key is being pushed by
the Faceplate.
• Adjusting Angle of Tilt Legs
The height can be adjusted by moving the legs
attached to the bottom of the terminal.
Raising Tilt Legs
STEP 1:
Turn the terminal over (key side down).
STEP 2:
Raise Tilt Legs to desired height.
STEP 3:
Turn the terminal over (key side up).
Lowering Tilt Legs
STEP 1:
Turn the terminal over (key side down).
STEP 2:
Lower Tilt Legs to desired height.
STEP 3:
Turn the terminal over (key side up).
9