NEC DT730G (CG): ITL-12CG-3 User Manual page 16

1.
• Attaching or Removing Faceplate and
DESI Printer Sheet
Removing Faceplate and DESI Printer Sheet
Remove DESI Printer Sheet using the following:
STEP 1:
Use the small notch at the lower right
corner of the terminal to lift the Faceplate
up.
STEP 2:
Remove the Faceplate.
STEP 1:
Remove the DESI Printer Sheet.
Attaching Faceplate and DESI Printer Sheet
STEP 1:
After replacing the DESI Printer Sheet on
the terminal, attach the Faceplate.
STEP 2:
At each corner, press the locking pin back
into place.
8