To Launch Photo Frame Application - NEC DT730G (CG): ITL-12CG-3 User Manual

APPENDIX :
The Photo Frame application allows the DT730G
LCD to display image files which are loaded from
a USB memory or downloaded from a XML server.
Images can be viewed one at a time, or as a slide
show.
For details of how to use the Photo Frame application
TIP
through XML server, contact the System Administrator.
To use the Photo Frame application, configuration
TIP
setting by System Administrator is required. For details,
contact the System Administrator.
Note:
The supported image file is bitmap format only.
Note:
For (ITL-12DG-3), Photo Frame application is not
supported.

To Launch Photo Frame Application

The following are ways to start the Photo Frame
application.
Usage
Implemented as an
XML application.
Used as a screen
saver.
The launching method of Photo Frame application
TIP
depends on the configuration setting. For details,
contact the System Administrator.
PHOTO FRAME APPLICATION
Procedure
2
Select Service →
Photo
Frame from the Menu screen.
An image file of the application
appears automatically when the
screen saver started.
Display Sample and Key Operations
The following shows the display sample and key
operations for the Photo Frame application.
Example of full screen display.
When the size of an image file to be displayed is larger
than the screen size of an LCD (480 x 272), the image
TIP
file is partially displayed from the upper-left corner of the
LCD.
- 123 -