General Operation - Watchguard DVR8ENT3 Product Manual

Button
Full
Simplified
Function

6.1.3. General Operation

Record
To record remotely at the same time for any event or alarm at the DVR side, click "
or " " → " " to go to the "Record Setting" page.
In the "Record Setting" page, you can set the following items:
‧Record type
‧Hard disk overwriting
‧Pre- / post-alarm record
‧Record time setting
‧Record path
If "Manual" is checked, click "
manual recording immediately, and the recordings will be saved in the specified location.
Function Description
Click to take a snapshot of the current view. The
Snapshot snapshot will be saved in the path you specified in
"Record Setting".
Click to show the current network connection
Information
details.
Click to go to the DVR control panel to operate
DVR Control
the DVR remotely.
" or " " on the main control panel to start the
44
REMOTE OPERATION
"