Dvr Power On; Date And Time Setting - Watchguard DVR8ENT3 Product Manual

8 channel h.264 dvr with push video notification
Table of Contents

Advertisement

2.4 DVR Power On

This device should be operated only with the type of power source indicated on the
manufacturer's label. Connect the indicated AC power cord to the power adapter, and
plug into an electrical outlet. Then, move the power switch to "
Note: Before the DVR is powered on, make sure the cameras are connected and
power-supplied for the detection of the camera video system to be correct,
and check the monitor (either LCD or CRT monitor) is connected to the DVR
before the DVR is powered on for correct video output detection.
Note: To ensure that your DVR works constantly and properly, it's recommended
to use an UPS, Uninterruptible Power Supply (Optional), for continuously
operation.

2.5 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR FIRST.
Note: Please DO NOT change the date or time of your DVR after the recording
function is activated. Otherwise, the recorded data will be disordered and
you will not be able to find the recorded file to backup by time search. If
users change the date or time accidentally when the recording function is
activated, it's recommended to clear all HDD data, and start recording
again.
Note: For the first time to use the DVR, please power it on for at least 48 hours
continuously after the date & time is set correctly. It helps to prevent DVR
time from resetting after the disconnecting of DVR power. If the DVR time
resets after the disconnecting of DVR power, for example, caused by a
power outage, the battery might run out and please replace the battery as
described in "APPENDIX 5 DVR BATTERY REPLACEMENT" at page 71.
Right-click to enter the DVR password with the password keypad. The default
administrator password is 0000. The status will be changed from
(administrator). Then, right-click to show the main menu, and select "QUICK START" 
"TIME SETUP" to set the date & time.
9
CONNECTION AND SETUP
" to power on the DVR.
(key lock) to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents