Dhcp; Ddns - Watchguard DVR8ENT3 Product Manual

5.8.3 DHCP

Note: When DHCP configuration is completed, please move to "DDNS" to
configure the DDNS service.
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
NOTIFY
EXIT
1) NETWORK TYPE
Select the network type as DHCP.
2) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet
Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this
port number for added flexibility or security.

5.8.4 DDNS

You need to additionally set DDNS when your network type is PPPOE or DHCP.
We have our own DDNS server for quick DDNS service configuration. You don't need to
additionally apply a DDNS service.
 To use our own DDNS server, select "default" in "SYSTEM NAME".
 The default host name is the MAC address of the DVR.
Then, note down the whole address under "CURRENT HOST ADDRESS", such as
MAC000E5318B3F0@ddns.dvrtw.com.tw. This is the default IP address used to access
your DVR remotely.
Note: Please at least use the default address to access your DVR remotely once.
This is to ensure our DDNS server has your DVR registered. Then, you may
change the host name to a more meaningful name to memorize later here.
Note: If you want to additionally apply a DDNS service instead of using ours,
please refer to
"Appendix 2" for details.
ADVANCED CONFIG
NETWORK SNTP FTP E-MAIL DDNS
NETWORK TYPE
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
www.surveillance-download.com/user/CMS.pdf
35
APPENDIX 1 SPECIFICATIONS
DHCP
192.168.001.010
192.168.001.254
255.255.255.000
168.095.001.001
139.175.055.244
0080
and check