System Setting; Password Setting; System Upgrade - Watchguard DVR8ENT3 Product Manual

5.7 System Setting

5.7.1 Password Setting

Right-click to display the main menu, and select "SYSTEM"  "TOOLS".
ACCOUNT
TOOLS
SYSTEM INFO
BACKUP DATA (USB)
BACKUP LOG (USB)
EXIT
1) ADMIN PASSWORD
Click "SETUP" to change the administrator password. The default administrator
password is 0000.
When you're prompted to enter the DVR password, enter the administrator
password, and
are allowed.
2) OPERATOR PASSWORD
Click "SETUP" to set or change the operator password. .
When you're prompted to enter the DVR password, enter the operator password,
and will be shown on the status bar of the screen and the main menu is NOT
allowed to access.

5.7.2 System Upgrade

Note: DVR system upgrade might cause all HDD data cleared when your current
system version is too old from the latest version. Therefore, before
upgrading the DVR system, check your current firmware version with your
installer or distributor, and make video backup if necessary.
Right-click to display the main menu, and select "SYSTEM"  "TOOLS"  "UPGRADE".
Save the upgrade files obtained from your installer or distributor in a compatible USB
flash drive, and insert it into the USB port at the front panel.
Then, click "SUBMIT" to start upgrading.
SYSTEM
LANGUAGE
ADVANCED LOGIN
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
RESTORE CONFIG
will be shown on the status bar of the screen and all operations
29
FREQUENTLY-USED FUNCTIONS
ENGLISH
ON
SETUP
SETUP
SUBMIT
SUBMIT
SUBMIT