Playback; Playback Control - Watchguard DVR8ENT3 Product Manual

4.3 Playback

Click " " on the quick menu bar to display the playback control panel, and click
play the latest recorded video clip, or click
Note: There must be at least 8192 images of recorded data for playback to work
properly. If not, the device will stop playback. For example, if the IPS is set
to 30, the recording time should be at least 273 seconds (8192 images / 30
IPS) for the playback to work properly.
Note: During playback, the image size of the recording (FRAME, FIELD or CIF) will
be shown on the screen.

4.3.1 Playback Control

Fast Forward
Fast Rewind
/
Play / Pause
Stop
Slow Playback
Previous /
/
Next Hour
Repeat
Backup
to enter the search list.
Increase the speed for fast forward. Click once to get 4X
speed forward and click twice to get 8X speed, etc., and
the maximum speed is 32X.
Increase the speed for fast rewind. Click once to get 4X
speed rewind and click twice to get 8X speed, etc., and the
maximum speed is 32X.
Click to play the latest recorded video clip immediately,
and click again to pause.
In the pause mode, click
forward, and click
Click to stop the video playback.
Click once to get 1/4X speed playback, and click twice to
get 1/8X speed playback.
Click to jump to the next / previous time interval in an hour,
for example, 11:00 ~ 12:00 or 14:00 ~ 15:00, and start
playing the earliest event video clip recorded during this
whole hour.
Click to set point A and point B in a video clip, and the
system will play only the specified range in that clip.
Click to open the backup menu for video backup.
16
once to get one frame
to get one frame rewind.
BASIC OPERATION
to