Muffler Screen And Spark Arrester - Kohler PRO 2.0 iS Owner's Manual

2
1
33
Recommended oil:
Foam-air-filter oil
or
engine oil (See page 15)
6. Insert the foam element into the air filter case.
NOTICE
The engine should never run without the foam ele-
ment; excessive piston and cylinder wear may
result.
TIP
Be sure the foam element sealing surface matches
the air filter so there is no air leak.
7. Install the air filter case cover in its original posi-
tion and tighten the screw.
8. Install the cover and tighten the screws.
AE01075

Muffler screen and spark arrester

WARNING
The engine and muffler will be very hot after the
engine has been run.
7DK-026
Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing
during inspection or repair.
1. Remove the muffler cover screws, and then
remove the muffler cover.
1 Muffler cover screw
1
2 Muffler cover
7PB-066
KohlerPower.com 33 590 03