Remedies For Error Messages Related To Spectroproofer/Auto Take-Up Reel - Epson Stylus Pro 7700 Service Manual

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908

3.4 Remedies for Error Messages related to SpectroProofer/Auto Take-up Reel

The Error messages and their corresponding remedies are explained below.
NOTE: SpectroProofer-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/9700/9710 because it does not support the SpectroProofer.
Auto Take-up Reel-related errors do not occur on Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/WT7900/WT7910//7890/7908 because it does not support the Auto Take-up Reel.
Errors related to the SpectroProofer and Auto Take-up Reel do not occur on Epson Stylus Pro 7700M/7710M.
Error
Section Error Name
No.
Driving auto take-up system
D3
Motor
error
Driving paper pressing system
D6 Motor
error
Cooling Fan lock detection
65 Motor
error
Paper Pressing Plate Sensor no
12 Sequence
detection error
TROUBLE SHOOTING
Status
A fatal error of controlling Auto
Take-up Motor occurs.
A fatal error of controlling Paper
Pressing Motor occurs.
Cooling Fan does not work.
Detection status of the Paper Pressing
Plate Sensor does not change.
Remedies for Error Messages related to SpectroProofer/Auto Take-up Reel
Cause
One of the errors (Error No.40 to 45) might
be occurring.
One of the errors (Error No.30 to 35) might
be occurring.
There might be some foreign material stuck
to the fan.
A connection failure might occur.
Cooling Fan is broken.
A connection failure might occur.
Detection flag for the Paper Pressing Plate
is damaged.
Paper Pressing Plate Sensor is broken.
Remedy/Check Point Program Check
Refer to Error No.40 to 45.
Refer to Error No.30 to 35.
Check manually if the fan rotates.
Check the connection between the
Cooling Fans and the Main Board
Assy.
Replace the Cooling Fan. (See
P.342, P. 343)
Check the connection between the
Paper Pressing Plate Sensor and
the Main Board Assy.
Replace the Paper Pressing Unit.
(See P.349)
Replace the Paper Pressing Plate
Sensor. (See P.340)
Confidential
Revision I
---
---
---
---
123