Advertisement
WIRELESS CONNECTION TO TELEPHONE VIA BLUETOOTH
Connecting
Bluetooth has a range of up to ten metres. Optimum
performance is achieved when the distance does not
exceed five metres.
Plug Konftel 60W in using the power adapter as
shown in the picture.
Adding a telephone (pairing)
Please note that Konftel 60W must not be switched on.
Press and hold the trim button for 2 seconds until the blue indicator lights start
2
secs
to flash.
Follow the instructions in your telephone handbook to add a new Bluetooth unit
to your telephone.
Select Konftel 60W in the list of units detected.
Enter the password 0000.
If the pairing was successful, a short audible signal will be heard and the LEDs will
stop flashing. If the pairing does not work, repeat the steps above but press and
hold trim button for 4 seconds instead of 2. The blue LEDs then start flashing more
slowly.
Answering a call
Press the on/off button when Konftel 60W rings (the LEDs flash).
Making a call
Make a call with your telephone in the normal way.
Transfer the call to Konftel 60W as per the instructions in the telephone
handbook.
Transferring a call between Konftel 60W and a telephone
Press and hold the on/off button for 2 seconds to transfer the call back to your
2
secs
phone.
Ending a call
Ending the call on your telephone.
Konftel 60W switches off automatically.
Disconnecting the Bluetooth link
If you do not intend to use the phone for a while, you can choose to disconnect the
link to save power. The link is automatically connected when the telephone rings or
you make a call.
Press the mute button to disconnect the Bluetooth link.
Plug adapter
Connection cable electricity, 6 m
Advertisement
