Advertisement
For further information, please consult the manual on enclosed CD
DESCRIPTION
Three LEDs
Three speakers
Blue – microphone on
Blue, flashing – pairing
Red – microphone off
Plug adapter
Connection cable elec-
tricity–mains socket
Connection cable electricity, 6 m
(60W–plug adapter)
Only use the accompa-
nying Helms-Man plug
adapter
DEN4824129
DPX481821 (USA)
DBN4824129 (UK)
Konftel 60W converts a system, DECT or mobile telephone into a conference telephone using
OmniSound
, Konftel's unique technology for optimal sound quality. The connection between
®
the telephone and Konftel 60W can be wireless via Bluetooth
connected to a computer and accessed using communication software, e.g. Skype
guide and Konftel's website www.konftel.com offer suggestions for various accessories and
applications.
Adjusting the microphone volume
The microphone volume can be adjusted during the call, but to avoid disturbing
the call, it may be best to adjust it during a test call after the telephone has been
paired.
2
Press and hold the mute button for 2 seconds until the LEDs start to flash and
secs
you hear a tone.
Increase the microphone volume using + and reduce it using –.
or
Adjust the microphone volume one level at a time until you can hear well in the
other end. Please note that too high a level may cause echoes and feedback.
Press the mute button to conclude setting the selected microphone volume.
Microphone, 360°
sound recording
Connection cable computer, 1.5 m
(60W–computer)
Connection cable telephone, 3 m
(60W–switchbox)
On/off
-
Answers
Reduces
a call
speaker volume
Line connection
Sockets for extra
microphones
Cable duct
Holes for
wall bracket
Mute
Switches off
Increases
the microphone
speaker volume
. Konftel 60W can also be
®
Power supply
Switchbox
(60W–telephone handset)
+
Trim
Tunes
the sound quality
. The user
®
Advertisement
