Using The Konftel With Bluetooth; Pairing And Connecting - Konftel 55Wx User Manual

USING THE KONFTEL WITH BLUETOOTH

Practically all mobile phones have Bluetooth and can be used for wireless communication
with the Konftel 55Wx. Bluetooth must be activated in the mobile phone's settings. Note
that it is also possible to connect to certain desktop phones and computers with Bluetooth,
but these may not have support for dialling numbers, for example, from the screen on the
Konftel 55Wx. Also see "Connecting a phone with Headset Profile" on
Audio can be transmitted in two different ways via Bluetooth. One is two-way, and it is
optimised for speech. The other (A2DP), has higher audio bandwidth, is one-way and
optimised for music.
Konftel 55Wx supports both methods and you can, moreover, select different sources for
speech and music. See Using Konftel 55Wx as a loudspeaker for playing music on
for more information.
 OmniSound performs over the full audio bandwidth (100–24000 Hz), but limita-
®
tions in the telecommunications networks and in Bluetooth technology reduce the
bandwidth somewhat and the sound is compressed. This has an effect on the sound
quality.
 Note that Bluetooth in the Konftel 55Wx can be turned off. If no button is marked
on the display screen, open the settings and activate Bluetooth.

PAIRING AND CONNECTING

Two devices have to be paired before they can communicate with Bluetooth. You do this in
different ways depending on whether your telephone supports simplified pairing via NFC
(near-field communications) or not.
13
page 24.
page 22