Specifications - Snapper LT-200 Series Operator's Manual

Lt-200 series
Hide thumbs Also See for LT-200 Series:
Table of Contents

Advertisement

ENGINE:
22 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
22 @ 3600 rpm
Displacement
40 Cu. in (656cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
64 Oz. (1.9 L)
20 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
20 @ 3600 rpm
Displacement
30.5 Cu. in (582cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
64 Oz. (1.9 L)
18.5 HP* Briggs & Stratton
Make
Briggs & Stratton
Model
Intek
Horsepower
18.5 @ 3600 rpm
Displacement
38 Cu. in (502 cc)
Electrical System
12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity
48 Oz. (1.4 L)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;
horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among
other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on
which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas
engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature,
humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher rated power for this Series engine.
CHASSIS:
LT Series
Fuel Tank Cap.
Capacity: 3.5 Gallons (13,2 L)
Rear Wheels
Tire Size: 22 x 10-8
Inflation Pressure: 10-12 psi (,68 bar)
Rear Wheels
Tire Size: 20 x 8.0-8
Inflation Pressure: 10-12 psi (,68 bar)
Front Wheels
Tire Size: 15 x 6.0-6
Inflation Press.: 12-15 psi (0,82-0,96 bar)
TRANSMISSIONS:
K46
Type
Hydrostatic Tuff Torq K46
Hydraulic Fluid
10w 30 Premium Engine Oil
Speeds
Forward: 0-5.5 MPH (9.0 km/h)
@ 3400 rpm
Reverse: 0-3.0 MPH (4.6 km/h)
Continuous Torque
170 ft-lbs
Output
Drawbar Rating
227 lbs (103 kg)
Maximum Weight
675 lbs (306 kg)
on Axle
DIMENSIONS:
LT Series
Overall Length
72"
Overall Width
37"
Height
45"
18.5hp Tractor
w/ 38" Mower Deck
480 lbs (218 kg)
20hp Tractor
w/ 42" Mower Deck
494 lbs (224 kg)
20hp Tractor
w/ 44" Mower Deck
532 lbs (241 kg)
22hp Tractor
w/ 50" Mower Deck
560 lbs (254 kg)
37

Specifications

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents