Specifications - Snapper 355Z Series Operator's Manual

Specifications
Product Specifications
DeckSize(inches)
Heightof Cut (inches)
Transaxle T ype
GroundSpeed - Fwd/Rev (mph)
Engine Power(hp)
Engine Displacement (cc)
Fuel T ankCapacity (gal)
355ZB2654
54"
1.5"- 4.5"
HydroGear ZT2800
0-7/0-5
26.0*
570
6.5
*Engine Power Rating information
The gross power rating for individual gas engine models is labeled in accordancewith SAE (Society of Automotive Engineers)
code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in
accordancewith SAEJ1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at
3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and
engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of
environmental issues applicableto operating the equipment, the gas engine will not develop the rated gross power when used
in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but
not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient
operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Dueto manufacturing and capacity
limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
o
43