Table of Contents
Advertisement
Chapter 4 Award BIOS Setup
4. IDE PRIMARY/ SECONDARY MASTER/SLAVE UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If you
hard drive and your system software both support Ultra DMA/33,
select Auto to enable BIOS support.
5. ON-CHIP SECONDARY PCI IDE
The integrated peripheral controller contains an IDE interface with
support for Secondary PCI IDE Channel.
6. SATA MODE
To select SATA Mode.
7. LEGACY MODE SUPPORT
Certain OS (Windows 9X/ME) is not supported under Native mode.
Page: 4-14
PMB-732LF USER
'
S MANUAL
Advertisement
Table of Contents
