Showroom Programme; Resetting The Factory Default Settings - Miele CVA 5060 Operating And Installation Instructions

Showroom programme

This function enables the machine to be
illuminated in a showroom situtation
without the heaters working.
Resetting the factory default
settings
The "factory default" setting is used to
reset the various settings back to the
default status.
From here you can select whether to
reset all settings back to the default or
to delete any user profiles.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Factory default
Back #
^ Use an arrow sensor to highlight
"Factory default", and then touch the
OK sensor.
Various options will then be available:
Settings: customising your machine
All settings
This option sets "All settings" back to
the factory default.
^ Select "Reset" under "All settings",
and touch the OK sensor.
All settings are then reset to the default.
factory defaults will not be carried out.
Factory default settings (the coffee
machine is delivered with the
following settings)
– Amount of coffee (medium)
– Temperatures for coffee and hot
water (medium settings for both)
– Pre-brewing (without)
– Automatic rinsing and Steam system
(both set to "On")
– Showroom prog. (Off)
– Time of day display (On for
60 seconds),
Clock format (24 h),
Timer - Switch on at (12:00),
Timer - Switch off after (1:00),
Timer - Switch off at (12:00), (Switch
on at and Switch off at are both
deactivated)
– Coffee jug (3 cups)
– Lighting: Brightness (medium)
– Safety: System lock (Off)
– Water hardness (Very hard 4)
If you select "Reset" by
mistake, switch the coffee
machine off: Resetting to the
37