Factory Default; Miele@Home, Remote Control And Supervision; Demo Mode (Showroom Programme) - Miele CVA 6805 Operating And Installation Instructions

Settings

Factory default

You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings.
When you do this the language and
time settings will not be deleted. The
number of drinks dispensed and the
coffee machine status (number of uses
until descaling/ degreasing the brew
unit) will also not be reset.
Please refer to the "Possible setting
options" chart for the factory settings.
The following settings can be reset
separately:
– MyMiele
– Profiles and their drinks: see
"Profiles" and "Profiles: creating and
processing your own drinks"
– (Standard) Miele Profile portion sizes
and parameters: see "Resetting
drinks"
Miele@home, Remote control
and SuperVision
These options will only appear if the
coffee machine has been signed on to
the Miele@home appliance network
(see separate Operating instructions).
Demo mode (Showroom
programme)
Do not activate this setting for
domestic use!
56
The coffee machine can be
demonstrated in the showroom
using
Showroom programme
the machine lights up but drinks cannot
be made or actions taken.
If you activate the demo mode, you
cannot switch the appliance off with
the On/Off sensor .
. In this mode