Miele CVA 5060 Operating And Installation Instructions page 67

... The message "Fault - 1" to " Fault -
4", or " Fault - 80" to " Fault - 83"
appears in the display?
^ Switch off the machine and wait for
approx. 1 hour before switching it
back on again.
If this fault message continues to
appear in the display, please call Miele.
... the message "Fault - 28" appears
in the display.
Enough ground coffee for one portion,
i.e. a level coffee spoonful of ground
coffee, passes through the ground
coffee chute. If there is too much
ground coffee, the machine is unable to
process it so that it can be emptied into
the waste container, and a fault
message appears in the display.
^ Switch off the machine and shortly
after switch it back on again.
Problem solving guide
... the message "Fault - 73" appears
in the display.
The brew unit cannot be positioned
correctly.
^ Take the brew unit out of the machine
and clean it thoroughly (see
"Cleaning and care - Brew unit").
^ Push the coffee ejector of the brew
unit into the correct position.
^ Set the brew unit to one side and put
the waste container and the water
container back in the machine.
^ Close the door.
The brew unit motor will now move
into the correct position.
^ When "Fit the brew unit" appears in
the display, open the door and put all
the parts back in the machine.
^ Close the appliance door.
If this fault message continues to
appear in the display, please call Miele
and quote the fault code.
67