Remoteupdate; Software Version; Showroom Programme (Demo Mode) - Miele CVA 7440 Operating And Installation Instructions

Built-in coffee machine
Table of Contents

Advertisement

You can change the coffee machine
settings, for example, in the Miele App
when remote control is switched on. To
start making a drink via the App,
MobileStart must be additionally
activated.
Remote control is switched on as
standard.

RemoteUpdate

The RemoteUpdate menu option is
only displayed and can only be
selected if the requirements for using
Miele@home have been met.
The RemoteUpdate function is used for
updating the software in your coffee
machine. If an update is available for
your coffee machine, this will be
downloaded by the machine
automatically. Updates will not be
installed automatically. They must be
initiated manually.
If you do not install an update, you can
continue to use your coffee machine in
the usual way. However, Miele
recommends installing updates.
Switching on/Switching off
RemoteUpdate is switched on as
standard. Available updates will be
downloaded automatically and will only
be installed if you initiate it.
Switch off RemoteUpdate if you do not
wish any updates to be downloaded.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
A message will appear in your coffee
machine display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
coffee machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the coffee machine
while an update is being downloaded
or installed. Otherwise, the update
will be aborted and will not be
installed.
- Some software updates can only be
carried out by a Miele service
technician.

Software version

The "Software version" menu option is
intended for Miele service technicians.
You do not require this information for
your own use.
Showroom programme (Demo
mode)
Do not activate this setting for
domestic use.
Settings
49

Advertisement

Table of Contents
loading

Table of Contents