Brew Unit - Miele CVA 5060 Operating And Installation Instructions

Brew unit

The brew unit must be cleaned once
a week by hand and without using
washing-up liquid, because the
moving parts are lubricated and the
rubber seals could become brittle in
a dishwasher.
^ Remove the water container, waste
container and the coffee chute cover.
^ Press the light coloured button under
the handle of the brew unit a and
whilst doing so turn the handle in the
direction of the arrow b.
^ Press the catch in front of the brew
unit c downwards, and pull the brew
unit carefully out of the machine.
If the brew unit is difficult to remove,
it is not correctly positioned (see
"Problem solving guide").
^ Clean the brew unit thoroughly under
hot running water without using
washing-up liquid.
Cleaning and care
Leave the handle in the same
position, otherwise the brew unit will
be out of alignment and you will not
be able to push it back into the
coffee machine.
^ Wipe any remaining coffee off the two
perforated plates. One perforated
plate is located in the funnel a and
the other to the left of the funnel b.
^ Dry the funnel area a to prevent
ground coffee from sticking to it.
^ Clean the inside of the machine and
remove any coffee residues.
Use your vacuum cleaner to
remove dry ground coffee
residues.
^ Place the brew unit on the guide
runners and, keeping it straight, push
it into the machine.
55