Computer Network Configuration; Configuring Dynamic Ip Addressing; Windows 7/8 - Verizon FiOS-G1100 Quantum User Manual

Click Next to continue. Your Gateway verifies the final
8.
settings and displays that it is successfully connected to the
Internet and is ready for use.
Upon the successful completion of setup, the Main screen of the
Gateway displays. Your Gateway is now configured. You can change any
of the Gateway settings after this initial log in.
If your Gateway is subsequently reset to the factory default settings,
the settings printed on the label will again be in effect.
If your Gateway fails to connect, follow the troubleshooting steps in
the Troubleshooting section of this guide.
2.1/

COMPUTER NETWORK CONFIGURATION

Each network interface on your computer should either automatically
obtain an IP address from the upstream Network DHCP server (default
configuration) or be manually configured with a statically defined IP
address and DNS address. We recommend leaving this setting as is.

CONFIGURING DYNAMIC IP ADDRESSING

2.1a/
To configure a computer to use dynamic IP addressing:

WINDOWS 7/8

In the Control Panel, locate Network and Internet, then
1.
select View Network Status and Tasks.
verizon.com/fios |
02 / CONNECTING
YOUR GATEWAY
©
2014 Verizon. All Rights Reserved.
24