Lan Ipv6 Stateless With No Wan Settings - Verizon FiOS-G1100 Quantum User Manual

ROUTING
Router Advertisement Lifetime (minutes between 0-150)
•
Interfaces - check one or more of the box(s) to apply IPv6
•
LAN settings to the selected interfaces:
– Ethernet/Coax IPv6 Enabled
– Wireless Access Point 1 IPv6 Enabled
– Wireless Access Point 2 IPv6 Enable
After entering all appropriate IPv6 settings click Apply to
3.
have changes take effect.

LAN IPv6 STATELESS WITH NO WAN SETTINGS:

To configure IPv6 LAN Stateless mode with No WAN
1.
connection, select the Stateless option on the IPv6
Configuration Control Page as shown below:
Specify the Stateless settings to be used to assign LAN IPv6
2.
addresses by entering the following details:
IPv6 LAN Configuration (select Stateless from the drop-
•
down list) as shown in drop-down list and page below: