SECURITY
LOG
You can modify the type of events that display in the security log. This
does not modify the event itself. It simply changes the information that
displays in the log.
EVENT TYPES
6.6a/
The security log records the following event types:
Access control – a packet has been accepted/blocked due to an
•
access control rule.
Advance filter rule – a packet has been accepted/blocked due to an
•
advanced filter rule.
ARP – an ARP packet has been accepted.
•
AUTH:113 request - an outbound packet for AUTH protocol has
•
been accepted (for maximum security level).
Broadcast/Multicast protection – a packet with a broadcast/
•
multicast source IP has been blocked.
Default policy – a packet has been accepted/blocked according to
•
the default policy.
Defragmentation failed – the fragment has been stored in memory
•
and blocked until all fragments have arrived and defragmentation
can be performed.
DHCP request – your Gateway sent a DHCP request (depends on the
•
distribution).
DHCP response - your Gateway sent a DHCP response (depends on
•
the distribution).